Maximum Motorsports Heavy-Duty series Rear Lower Control Arms for the 1979-1998 Mustang improve traction and handling by reducing the unwanted deflection allowed by the stock soft rubber bushings and flexible stamped steel control arm. Unique MM 3-piece bushing and spherical bearing design easily allows the articulation required for proper handling, and reduces the deflection that can cause wheel hop.

Fits 1979-1998 Mustang with solid rear axle. Includes spring perch and swaybar mount.

400 rwhp max

Better by design

• Stress on the chassis torque-boxes is greatly reduced because the MM design allows proper articulation of the rear suspension.
• 3-piece urethane bushings allow articulation while reducing deflection and damping noise transmission at the chassis end.
• Spherical bearing allows articulation while eliminating deflection at the axle end.
• Large 2" diameter round steel tube design for highest strength.

Why do I need MM Rear Lower Control Arms?

• The stock Mustang rear lower control arms are fitted with very large, soft rubber bushings. Those bushings allow the axle to shift fore and aft, causing the toe of the rear tires to change. Toe changes cause instability as the rear of the car steers itself in unpredictable directions. The rubber bushings also allow axle wind-up during acceleration, which in turn causes wheel hop.
• MM Rear Lower Control Arms were designed by our engineering team to minimize fore/aft movement of the axle, while also retaining the suspension's ability to properly articulate. This improves performance without unnecessarily compromising ride quality or handling.
• Potential torque-box damage is greatly reduced because the MM design allows the suspension to easily articulate.
• Manufactured by MM in the U.S.A.